how2game

Hardware

How to Update Your Motherboard BIOS Safely: ASUS and MSI Steps

Should you update your BIOS, and how? Learn when it is worth the risk, how to prepare the USB drive and the ASUS EZ Flash and MSI M-Flash steps, using the makers' own pages.

The BIOS is the small program that starts your PC before Windows loads. Updating it can add support for new processors or fix problems, but it is also one of the few updates that can leave a PC unable to start if it goes wrong. This guide explains when to do it, how to prepare and the steps that ASUS and MSI publish for their own boards. If you use another brand, follow its own instructions, because the menus differ.

## Should you update at all? ASUS is direct about this. Its FAQ says not to update the BIOS unless it is necessary, because a failed update can leave the device unable to boot. So the safe rule is simple: do not update just because a new version exists. Update when you have a reason, for example a fix for a problem you actually have, or support for a part you are about to install. Before you start, note the BIOS version you have now, so you can check that the update worked.

## Prepare the USB drive Both makers ask for the same basics: 1. Format a USB drive as FAT32. ASUS says the BIOS environment does not support NTFS. MSI gives the same format. Formatting erases the drive, so back up anything on it. 2. Download the BIOS file from the maker's own site by searching for your exact motherboard model. ASUS says to download from its support site, and MSI says to use its official website. 3. Extract the file. MSI says to right-click and use Extract All. 4. Copy it to the USB drive. MSI says to copy the whole folder to the root of the drive and not to place the files in any subfolder, to avoid reading problems.

## ASUS EZ Flash 2 ASUS says this procedure applies only to boards that have EZ Flash 2. The steps are: 1. Enter Advanced Mode in the BIOS. 2. Open the Tool menu. 3. Select ASUS EZ Flash Utility. 4. Select the BIOS file to start the update. 5. When the PC restarts, enter the BIOS again. 6. Press F5 to load Optimized Defaults. 7. Press F10 to save and reset.

## MSI M-FLASH 1. During the boot screen, press the Delete key repeatedly to enter the BIOS setup, then click M-FLASH. 2. Click Yes to enter the M-FLASH screen. 3. Select the USB drive and the folder with the BIOS file. 4. Choose the BIOS file and press Enter. 5. Select Yes to start the update. 6. Wait. The PC restarts by itself when it is done. 7. Press Delete again to enter the BIOS and confirm that the version changed.

MSI gives one very clear warning: do not turn off the computer, disconnect the power or remove the USB drive during the update. MSI also mentions that boards with a Flash BIOS button can refresh the BIOS even without a processor installed, and it has a separate article for that.

## After the update Loading Optimized Defaults, as ASUS tells you to, returns your BIOS settings to their standard values. That means a memory profile you turned on earlier may be off again. If you used one, see our guide on turning on XMP and EXPO and set it again. Then check that Windows starts normally and that your drives and fans are detected.

## Safer habits - Make sure the power cannot be cut. Do not update during a storm or when the PC is on an unstable socket. - Search for your exact board model when you download the file, as both makers say. - If your only problem is a game that stutters, a new graphics driver is a much safer first step. Our guide on updating graphics drivers safely shows how.

## What we could not confirm We read the ASUS and MSI pages for their own boards only. We did not check other brands, and the sources do not say how to recover from a failed update, so check your maker's support page if something goes wrong.

Verified with (2)

We check each fact against at least two independent sources and write the text ourselves.