How-to
How to Check and Change Your Monitor Refresh Rate in Windows 11
Is your high refresh rate monitor really running at its top speed? Check and change the rate in Windows 11, and learn what the asterisk and Dynamic refresh rate mean.

Many gaming monitors sell on a high refresh rate, but Windows does not always start at the top setting. If a 144 Hz monitor is set to a lower rate, the screen can look less smooth than it should. Checking takes a minute. This guide follows the steps Microsoft publishes for Windows 11.
## Step 1: open Advanced display Microsoft's steps are: 1. Select Start, then Settings. 2. Go to System, then Display. 3. Open Advanced display.
On this page Windows shows the current resolution and refresh rate for the selected display, and whether the display supports variable refresh rate, called VRR.
## Step 2: choose a refresh rate Next to Choose a refresh rate, open the list and select the rate you want. Microsoft says the options depend on your display, and that laptops and external displays may offer higher rates. If your monitor is rated for a higher rate than anything in the list, the list is what Windows currently believes the display can do.
### What the asterisk means Microsoft warns that an asterisk next to a rate means it does not support your current resolution. If you select it, Windows changes your display resolution to reach that rate. So if your resolution suddenly changes, this is the reason, and you can switch back.
## Dynamic refresh rate On some hardware you will also see a Dynamic refresh rate toggle. Microsoft explains that it automatically adjusts the refresh rate depending on what you are doing. You can turn it on or off in Advanced display, but the toggle only turns on if your hardware supports it. The requirements are a display with VRR support and a refresh rate of at least 120 Hz.
For gamers, Microsoft adds a warning. Dynamic refresh rate should not affect games designed for VRR, but it can limit the maximum refresh rate of other games. If a game seems to run at a lower rate than expected, Microsoft recommends turning Dynamic refresh rate off. Microsoft also says that if your display supports VRR, changing the refresh rate may be unnecessary, because many games use VRR automatically.
## If the screen misbehaves If the monitor does not work properly after you change settings, Microsoft's separate monitor troubleshooting page suggests several steps, in this order: - Check for Windows updates. - Press Windows key and P and confirm that Extend is selected. - Disconnect docks, dongles and adapters, which can cause conflicts. - Check that the cable is firmly connected, and replace it to see whether the old one was faulty. - Try another video output port on the PC. - Reset the graphics driver with Windows key, Ctrl, Shift and B, and restart the PC if that does not help. - If the problem started after a driver update, roll back the driver in Device Manager under Display adapters.
## Quick checklist - Open Settings, System, Display, Advanced display. - Pick the highest rate that does not show an asterisk, unless you want the resolution change. - Turn Dynamic refresh rate off if a game runs at a lower rate than expected. - Do not assume a new cable adds a refresh rate. Microsoft's pages list cables only as a troubleshooting step.
## What we could not confirm Neither Microsoft page says which cable or port is needed for a specific refresh rate, so we cannot give that advice here. Check your monitor's manual for the rates it supports at each resolution.
Verified with (2)
We check each fact against at least two independent sources and write the text ourselves.